Upcycled Dresser Drawers For Under Bed Storage

pin

pin

Just a warning....I LOVE how these drawers turned out.  BUT it was one of those projects that took forEVer because I kept loosing motivation and finding myself tripping over stacks of drawers laying around the house...

Besides using them as storage under a bed, drawers on casters would work well under an entry bench for shoes, and under the coffee table for blankets or toys, etc.

20111020-IMG_9822

20111020-IMG_9822

I started with a basic dresser.  This one has some history with my family but was fairly beat up and out of shape. I gave it a good wash with Murphy's Oil soap and warm water.

[googlead]

20111007-IMG_3329

20111007-IMG_3329

(above photo from pumpkins)

After allowing the wood to dry thoroughly, I sprayed it with Zinsser Primer.  I had never completed a piece of furniture exclusively with spray paint and I was ready to attempt it.  Spraying is pretty quick, and if you have the space and weather for it, it can be very handy.  The clean up of oil based primers is rather obnoxious so that's another plus with spray.  Another tip?....Use acetone to clean your trigger finger when you're done...it works great.  (Thanks Ari)

20111020-IMG_9827

20111020-IMG_9827

I neglected to get a shot of the drawers with their TWO coats of zinsser primer before starting the first coat of lagoon Rustoleum.

20120201-IMG_1315

20120201-IMG_1315

Lagoon is one of my favorites.  I've used it on various candle sticks in the past. [googlead]

20111020-IMG_9823

20111020-IMG_9823

In between primer coats and Lagoon coats, I lightly sanded the wood with 425 grit sand paper.  I love my handheld sander device for this.  Thanks Grandpa!

20111023-IMG_9924

20111023-IMG_9924

The drawers took about three coats of Lagoon.  I say "about" because there may have been a fourth in spots.  I did not spray the bottoms but gave them a fun graffiti heart.  After the paint was completely dry, I added a brown glaze.  25% dark brown paint to 75% glazing medium.  Click here to read about glazing in another post.

20120202-IMG_1328

20120202-IMG_1328

The next step was cut scrapbook paper to line the drawers.  I cut the big 12" paper into fourths so they would fit the sides.  For continuity, I used the fourths on the bottom of the drawers as well (even though a full sheet would fit). [googlead]

20120310-IMG_1936

20120310-IMG_1936

I brushed the drawer with Mod Podge in small sections the size of the cut scrapbook paper.  After adhering the paper to the drawer, I brushed the Mod Podge over the top of the paper.  I only used one coat, but two would have been better.  Frankly this project was taking a bit longer then I had estimated and at this point in the game I was "over it."

20120311-IMG_1942

20120311-IMG_1942

I also Mod Podged scrapbook paper to the handles after painting them black.

20120311-IMG_1940

20120311-IMG_1940

After the Mod Podge was dry, we (okay......Dan) drilled holes in the bottom of the drawers to attach the casters.

Check out the casters I got on Amazon:

20120311-IMG_1943

20120311-IMG_1943

Next I measured the drawer for the metal label.  I wasn't paying much attention to the size of the labels I bought and I think they look great, but would probably look better slightly larger.

Here is a link to the labels:

[googlead]

20120311-IMG_1944

20120311-IMG_1944

They turned out super cute.  Even though it was a bit of a lengthy project.

[googlead]

20120404-IMG_2237

20120404-IMG_2237

They fit perfectly under daughter 2.0's bed.

20120404-IMG_2238

20120404-IMG_2238

Their labels are perfect to help keep her toys organized.

[googlead]